Product Description
Water-based acidic cleaning solution specially formulated for ultrasonic cleaning machines. Designed to remove light to moderate rust, oxidation stains, surface oxides and metal contamination from components while supporting stable cavitation performance for effective and uniform cleaning.
Features
- Optimized for ultrasonic cleaner applications
- Low-foam wetting system
- Effective penetration into narrow gaps and complex geometries
- Water-based and non-flammable
- Easier rinsing than solvent-based cleaners
- Controlled rust removal action
- Suitable for maintenance and workshop applications
- Improves cleaning consistency
Application Guide
- Prepare the ultrasonic cleaner tank and ensure it is free from incompatible residues.
- Dilute with clean water according to the recommended concentration or use as supplied when appropriate.
- Set bath temperature to 40–60°C when heating is available.
- Place components in a basket or holder and avoid direct contact with the tank bottom.
- Ensure all surfaces are fully immersed.
- Run the ultrasonic cleaning process and inspect periodically.
- For heavy rust, repeat the process or assist with light brushing.
- Rinse thoroughly with clean water.
- Dry immediately and apply temporary rust protection if required.
Notes
- Suitable for maintenance workshops and production support
- Effective for rust, oxidation stains and metal contamination
- Freshly cleaned metal surfaces may develop flash rust if left wet
- Immediate rinsing and drying are strongly recommended
- Compatible with ultrasonic cleaning equipment
Packaging
1 Litre (HC9042001) • 5 Litres (HC9042005) • 20 Litres (HC9042020)
Storage
Store in a cool and dry place. Avoid direct sunlight. Keep container tightly closed when not in use.
Safety
Keep out of reach of children. If contact with eyes occurs, rinse immediately with plenty of water. If swallowed, drink water or milk and seek medical attention. Use gloves, eye protection and protective clothing.